How to Remove Trusted Relayer ISM from Warp Route

Using the Hyperlane CLI

When first deploying with the CLI, new warp routes use a Trusted Relayer ISM out of the box so you don't need to run a relayer or validator.

In order to go to production, you'll need to remove this ISM with the Hyperlane CLI.

Prerequisites

• The warp route config.
  • For new deployments, this config may take the filepath of CURRENT_DIR/configs/warp-route-deployment.yaml.
  • For existing deployment, the config can be generated by using hyperlane warp read if it exists in the Registry.
• The warp route token symbol.
  • The token symbol can be found onchain, or in your local Hyperlane Registry. By default, it is written to $HOME/.hyperlane/deployments/warp_routes/<tokenSymbol>.
• Access to the private key that currently owns the warp route.

info

If you followed the Deploy a Warp Route guide, you most likely have deployed a warp route with a trusted relayer set to a signer address.

To confirm using the Hyperlane CLI, locate your token symbol and the chain on which it is deployed:

hyperlane warp read --symbol <tokenSymbol>

You can then choose the warp route for which you're removing the trusted relayer.

After running warp read, you should see a similar config under interchainSecurityModule containing a trustedRelayerIsm:

yourchain:
  ...
  interchainSecurityModule:
    address: "0xd54d32cD6a62482497252D59E6cCC1445fF0b92d"
    type: "staticAggregationIsm"
    modules:
      - address: "0x50b6dA835D9b8b20523891410a2E042855B465C8"
        relayer: "0xf39Fd6e51aad88F6F4ce6aB8827279cffFb92266"
        type: "trustedRelayerIsm"
      - owner: "0xf39Fd6e51aad88F6F4ce6aB8827279cffFb92266"
        address: "0xcE512189fF1BD41186E9eDda02BF321Fb1FC6eAc"
        type: "defaultFallbackRoutingIsm"
        domains: {}
    threshold: 1

This particular config has a trustedRelayerIsm as part of the staticAggregationIsm.

This means that the relayer address will be allowed to call the Warp Route’s handle() function. In other words, the relayer can execute arbitrary messages on the Warp Route. This may be undesirable in cases outside of the self-relaying feature.

By default, warp read will save the output to CURRENT_DIR/configs/warp-route-deployment.yaml. Follow these steps using the CLI to transfer the existing ownership to another address.

Step 1: Configuration

Update the warp-route-deployment.yaml by removing the trustedRelayerIsm block from modules. Alternatively, you can configure the entire modules block as desired.

warp-route-deployment.yaml

yourchain:
  mailbox: '0x979Ca5202784112f4738403dBec5D0F3B9daabB9'
  owner: '0xf39Fd6e51aad88F6F4ce6aB8827279cffFb92266'
  interchainSecurityModule:
    address: '0xd54d32cD6a62482497252D59E6cCC1445fF0b92d'
    type: 'staticAggregationIsm'
    modules:
-     - address: '0x50b6dA835D9b8b20523891410a2E042855B465C8'
-       relayer: '0xf39Fd6e51aad88F6F4ce6aB8827279cffFb92266'
-       type: trustedRelayerIsm
      - owner: '0xf39Fd6e51aad88F6F4ce6aB8827279cffFb92266'
        address: '0xcE512189fF1BD41186E9eDda02BF321Fb1FC6eAc'
        type: 'defaultFallbackRoutingIsm'
        domains: {}
    threshold: 1
  name: Ether
  symbol: ETH
  decimals: 18
  totalSupply: 0
  type: native

Step 2: Apply

Using the CLI, execute:

hyperlane warp apply \
    --symbol <tokenSymbol> \
    --config $(pwd)/configs/warp-route-deployment.yaml

You should see a batch of transactions executed on chain, and a final message indicating that the warp config has been updated.

Step 3: Confirm

To confirm that the trusted relayer was successfully removed using the Hyperlane CLI, run the following command with your token symbol and the chain it is deployed on:

hyperlane warp read --symbol <tokenSymbol>

After running warp read, confirm that the trusted relayer ISM has been removed from your warp route (In this example, it should only contain the remaining defaultFallbackRoutingIsm). You should see a similar config under interchainSecurityModule:

yourchain:
  mailbox: "0x979Ca5202784112f4738403dBec5D0F3B9daabB9"
  owner: "0xf39Fd6e51aad88F6F4ce6aB8827279cffFb92266"
  interchainSecurityModule:
    address: "0x8af9445d8A3FbFBd1D5dF185B8a4533Ab060Cf36"
    type: "staticAggregationIsm"
    modules:
      - owner: "0xf39Fd6e51aad88F6F4ce6aB8827279cffFb92266"
        address: "0xBe0232d5d45f9aD8322C2C4F84c39e64302Cd996"
        type: "defaultFallbackRoutingIsm"
        domains: {}
    threshold: 1
  name: "Ether"
  symbol: "ETH"
  decimals: 18
  totalSupply: 0
  type: "native"

By completing these steps, you've successfully removed the trusted relayer ISM from your Warp Route and enhanced the security of your warp route setup. Your warp route is now ready for production use.