Skip to main content

Configuration reference

CONFIG_FILES​

Description: (Env only) List of additional configuration file paths to load in order (such as those in hyperlane-monorepo/rust/main/config). They will be merged first to last, so if both the first one and the last one specify a specific config path, the value set in the last file listed will be used.

These files must be accessible within the filesystem your agent has access to. If you're running in Docker, see the agent configuration guide for tips on mounting your config files into your Docker container.

Optional: Yes

Agents: All

Type: string (Comma separated list of file paths)

Not supported as an argument

chains​

Description: Configuration for each of the chains that must be used by an agent.

Optional: No

Agents: All

Type: Map<string, ChainSetup (Object)> (See chains.* for ChainSetup values)

--chains.${CHAIN_NAME}.*

chains.<chain_name>.name​

Description: Name of the domain. Allows specifying a different name for the domain than the chain's true name. This should almost always be the same as chain_name.

Requires: Alignment with domain id if it is a known domain name.

Optional: No

Agents: All

Type: string

--chains.${CHAIN_NAME}.name $DOMAIN_NAME
--chains.ethereum.name ethereum

chains.<chain_name>.domain​

Description: Hyperplane domain id to uniquely identify the domain. See also: Domain Identifiers.

Requires: Alignment with domain name if it is a known domain.

Optional: No

Agents: All

Type: Numeric (string | number)

--chains.${CHAIN_NAME}.domain $DOMAIN_ID
--chains.ethereum.domain 1

chains.<chain_name>.mailbox​

Description: Address of the mailbox contract on the chain. See also contract addresses.

Optional: No

Agents: All

Type: Hash (string)

--chains.${CHAIN_NAME}.mailbox "$MAILBOX_ADDRESS"
--chains.ethereum.mailbox "0x35231d4c2D8B8ADcB5617A638A0c4548684c7C70"

chains.<chain_name>.interchainGasPaymaster​

Description: Address of the interchain gas paymaster contract on the chain. See also contract addresses.

Optional: No

Agents: All

Type: Hash (string)

--chains.${CHAIN_NAME}.interchainGasPaymaster "$IGP_ADDRESS"
--chains.ethereum.interchainGasPaymaster "0x6cA0B6D22da47f091B7613223cD4BB03a2d77918"

chains.<chain_name>.validatorAnnounce​

Description: Address of the validator announce contract on the chain. See also contract addresses.

Optional: No

Agents: All

Type: Hash (string)

--chains.${CHAIN_NAME}.validatorAnnounce "$VALIDATOR_ANNOUNCE_ADDRESS"
--chains.ethereum.validatorAnnounce "0x9bBdef63594D5FFc2f370Fe52115DdFFe97Bc524"

chains.<chain_name>.merkleTreeHook​

Description: Address of the merkle tree hook contract on the chain. See also contract addresses.

Optional: No

Agents: All

Type: Hash (string)

--chains.${CHAIN_NAME}.merkleTreeHook "$MERKLE_TREE_HOOK_ADDRESS"
--chains.ethereum.merkleTreeHook "0x48e6c30B97748d1e2e03bf3e9FbE3890ca5f8CCA"

chains.<chain_name>.signer​

Description: The signer that should be used this chain

Optional: Yes (Will use defaultsigner if not specified)

Agents: All

Type: SignerConf (Object)

--chains.${CHAIN_NAME}.signer.*

chains.<chain_name>.signer.type​

Description: The type of signer that is defined. A HexKey signer uses a private key, an Aws signer uses an AWS based KMS, and Node assumes the local node will sign RPC calls.

Optional: Yes; Defaults to node unless a key is specified in which case it defaults to hexKey

Agents: All

Type: Enum ("hexKey" | "aws" | "cosmosKey" | "node")

Accepted values for the different VMs are:

  • EVM: hexKey (ECDSA) or aws (ECDSA)
  • sealevel: hexKey (ED25519)
  • cosmos: cosmosKey
--chains.${CHAIN_NAME}.signer.type hexKey
--chains.ethereum.signer.type node

chains.<chain_name>.signer.key​

Description: A hex key. The hex string of a private key.

Requires: chains.<chain_name>.signer.type = "hexKey" | undefined

Optional: No (iff requirements are met)

Agents: All

Type: string

--chains.${CHAIN_NAME}.signer.key "8166f546bab6da521a8369cab06c5d2b9e46670292d85c875ee9ec20e84ffb61"

chains.<chain_name>.signer.id​

Description: The UUID identifying the AWS KMS key

Requires: chains.<chain_name>.signer.type = "aws"

Optional: No (iff requirements are met)

Agents: All

Type: string

--chains.ethereum.signer.type "alias/validator-signer-ethereum"

chains.<chain_name>.signer.region​

Description: The AWS region

Requires: chains.<chain_name>.signer.type = "aws"

Optional: No (iff requirements are met)

Agents: All

Type: string

--chains.${CHAIN_NAME}.signer.region us-east-1

chains.<chain_name>.protocol​

Description: Connection protocol to use.

Optional: Defaults to "ethereum"

Agents: All

Type: Enum ("ethereum" | "fuel")

--chains.${CHAIN_NAME}.protocol ethereum
--chains.ethereum.protocol ethereum

chains.<chain_name>.rpcConsensusType​

info

The consensus type currently only applies to EVM chains.

Connections to non-EVM chains only support a single RPC url. If more than one RPC url is specified in rpcUrls, only the first one will be used.

Description: How to communicate with the provider

  • "single" uses a basic http connection
  • "fallback" will try the first URL and then automatically "fall back" on a connection or other provider failure to the next provider; this should only retry calls which fail due to the provider and not the call itself such; an insufficient gas error for instance would not fall back.
  • "quorum" requires a majority of the URLs to agree with the exception of submitting transactions; it will automatically coordinate the "latest" block if not specified to reduce sync errors.

Requires: chains.<chain_name>.protocol = "ethereum" | undefined

Optional: Defaults to "fallback"

Agents: All

Type: Enum ("fallback", "single", "quorum")

--chains.${CHAIN_NAME}.rpcConsensusType single

chains.<chain_name>.customRpcUrls​

info

Connections to non-EVM chains only support a single RPC url. If more than one RPC url is specified, only the first one will be used.

Description: Comma-separated URLs to connect the provider to. The difference between customRpcUrls and rpcUrls is that customRpcUrls allows for more user friendly inputs from the CLI or environment variables (comma-separated vs array).

Type: string (comma separated list of urls without spaces)

--chains.${CHAIN_NAME}.customrpcurls "$CONNECTION_URLS"
--chains.ethereum.customrpcurls "http://127.0.0.1:8545,http://127.0.0.1:8546,http://127.0.0.1:8547"

chains.<chain_name>.rpcUrls​

info

Connections to non-EVM chains only support a single RPC url. If more than one RPC url is specified, only the first one will be used.

Description: URLs to connect the provider to. The first one is initially used, and on failure the other ones are tried. See rpcConsensusType for more information.

Requires:

(chains.`<chain_name>`.protocol = "ethereum" | undefined)
    AND (chains.`<chain_name>`.connection.type = "fallback" | "quorum")
    OR chains.`<chain_name>`.protocol = "cosmos" | "sealevel" | "fuel"

Optional: No (iff requirements are met)

Agents:

Type: string

--chains.${CHAIN_NAME}.rpcurls.0.https "$CONNECTION_URL_0"
--chains.${CHAIN_NAME}.rpcurls.1.https "$CONNECTION_URL_1"
--chains.${CHAIN_NAME}.rpcurls.2.https "$CONNECTION_URL_2"
--chains.ethereum.rpcurls.0.https "http://127.0.0.1:8545"
--chains.ethereum.rpcurls.1.https "http://127.0.0.1:8546"
--chains.ethereum.rpcurls.2.https "http://127.0.0.1:8547"

chains.<chain_name>.index.from​

Description: Height at which to start indexing contracts.

Optional: Defaults to 0

Agents: Relayer & Scraper

Type: Numeric (string | number)

--chains.${CHAIN_NAME}.index.from 0
--chains.ethereum.index.from 16271503

chains.<chain_name>.index.chunk​

Description: Number of blocks to query at once when indexing contracts. Note that the configured providers must support whatever value is set. The default should work with nearly all providers.

Optional: Defaults to 1999

Agents: Relayer & Scraper

Type: Numeric (string | number)

--chains.${CHAIN_NAME}.index.chunk 1999
--chains.ethereum.index.chunk 1999

defaultsigner​

info

Because each VM supports a different signer type, the default signer can only support a single VM type. For instance, if the default signer is a ECDSA one, it will only be able to sign on EVM chains.

Description: The default signer that should be used for all chains which did not specify their own.

Optional: Yes

Agents: All

Type: SignerConf (Object)

--defaultSigner.*

defaultsigner.type​

Description: The type of signer that is defined. A HexKey signer uses a private key, an Aws signer uses an AWS-based KMS, and Node assumes the local node will sign RPC calls.

Optional: Yes; Defaults to node unless a key is specified in which case it defaults to hexKey

Agents: All

Type: Enum ("hexKey" | "aws" | "cosmosKey" | "node")

--defaultSigner.type hexKey

defaultsigner.key​

Description: A hex key. The hex string of a private key.

Requires: defaultsigner.type = "hexKey" | undefined

Optional: No (iff requirements are met)

Agents: All

Type: string

--defaultSigner.key "8166f546bab6da521a8369cab06c5d2b9e46670292d85c875ee9ec20e84ffb61"

defaultsigner.id​

Description: The UUID identifying the AWS KMS key

Requires: defaultsigner.type = "aws"

Optional: No (iff requirements are met)

Agents: All

Type: string

--defaultSigner.id "alias/validator-signer-ethereum"

defaultsigner.region​

Description: The AWS region

Requires: defaultsigner.type = "aws"

Optional: No (iff requirements are met)

Agents: All

Type: string

--defaultSigner.region us-east-1

metricsport​

Description: Port to expose prometheus metrics on

Optional: Defaults to 9090

Agents: All

Type: Numeric (string | number)

--metrics-port 9090

log.fmt​

Description: Configuration for the log module. This controls logging.

Optional: Defaults to pretty

Agents: All

Type: Enum ("pretty" | "json" | "full" | "compact")

--log.fmt pretty

log.level​

Description: Configuration for the log module. This controls logging. For full verbosity (including that of dependencies), use dependencyTrace.

Optional: Defaults to info

Agents: All

Type: Enum ("dependencyTrace" | "trace" | "debug" | "info" | "warn" | "error" | "off")

--log.level info

originchainname​

Description: Name of the chain a validator should validate for and name of the chain a relayer should relayer messages from. Deprecated for Relayer, use #relaychains instead.

Optional: No - Validators; Yes - Relayer

Agents: Validator & Relayer

Type: string

--originChainName ethereum

validator​

Description: The signer that should be used by the validator.

Optional: Yes

Agents: All

Type: SignerConf (Object)

--validator.*

validator.type​

Description: The type of EVM signer that is defined. Note that regardless of the VM the validator is operating on, checkpoints are always signed using the EVM ECDSA curve. A HexKey signer uses a private key, an Aws signer uses an AWS based KMS, and Node assumes the local node will sign RPC calls.

Optional: Yes; Defaults to node unless a key is specified in which case it defaults to hexKey

Agents: All

Type: Enum ("hexKey" | "aws" | "node")

--validator.type hexKey

validator.key​

Description: A hex key. The hex string of a private key.

Requires: validator.type = "hexKey" | undefined

Optional: No (iff requirements are met)

Agents: All

Type: string

--validator.key 8166f546bab6da521a8369cab06c5d2b9e46670292d85c875ee9ec20e84ffb61

validator.id​

Description: The UUID identifying the AWS KMS key

Requires: validator.type = "aws"

Optional: No (iff requirements are met)

Agents: All

Type: string

--validator.id "alias/validator-signer-ethereum"

validator.region​

Description: The AWS region

Requires: validator.type = "aws"

Optional: No (iff requirements are met)

Agents: All

Type: string

--validator.region us-east-1

checkpointsyncer.type​

Description: Defines the method of syncing checkpoints

Optional: No

Agents: Validator

Type: Enum ("localStorage" | "s3")

--checkpointSyncer.type localStorage

checkpointsyncer.path​

Description: Path on the local disk of a local storage type checkpoint syncer configuration.

Requires: checkpointsyncer.type = "localStorage"

Optional: No (iff conditions are met)

Agents: Validator

Type: string

--checkpointSyncer.path "/tmp/syncer"

checkpointsyncer.bucket​

Description: S3 bucket name

Requires: checkpointsyncer.type = "s3"

Optional: No (iff conditions are met)

Agents: Validator

Type: string

--checkpointSyncer.bucket signatures-ethereum

checkpointsyncer.folder​

Description: Folder in the S3 bucket

Requires: checkpointsyncer.type = "s3"

Optional: No (iff conditions are met)

Agents: Validator

Type: string

--checkpointSyncer.folder signatures-ethereum

checkpointsyncer.region​

Description: S3 bucket region

Requires: checkpointsyncer.type = "s3"

Optional: No (iff conditions are met)

Agents: Validator

Type: string

--checkpointSyncer.region us-east-1

interval​

Description: How frequently the validator should check for new checkpoints in seconds. See also latencies.

Optional: No

Agents: Validator

Type: Numeric (string | number)

--interval 30

db​

Description: This is a local filesystem path to where the agents store relevant data on disk. This must be unique per agent! Multiple agents must have different paths. The path is relative to the current working directory if it does not start with a system defined root path such as / on unix. When using docker images, ensure that this folder gets persisted across runs.

For the scraper, this is the connection string to a postgresql database.

Optional: For validators and relayer it is optional and defaults to a path in the current working directory which includes the originchainname. For the scraper it is required.

Agents: All

Type: string

# Validator
--db "/tmp/hyp/validator/ethereum-cache"

# Relayer
--db "/tmp/hyp/relayer/ethereum-cache"

# Scraper
--db "postgresql://postgres:password@localhost:5432/dbname"

relaychains​

Description: List of chains to deliver messages between.

Optional: No

Agents: Relayer

Type: string (comma separated list)

--relayChains "arbitrum,ethereum,bsc"

gaspaymentenforcement​

Description: JSON stringified array of gas payment enforcement configurations sorted by highest priority first. The last policy should be a catch-all and handle any messages that did not match a previous policy.

Optional: Defaults to no enforcement ([{"type": "none"}])

Agents: Relayer

Type: JSON (string)

type gaspaymentenforcement = Array<GasPaymentEnforcementPolicy>;

type GasPaymentEnforcementPolicy =
( // fields specific to each type...
    // No requirements - all messages are processed regardless of gas payment
    { type: "none" }
    // Messages that have paid a minimum amount will be processed
  & { type: "minimum", payment: U256 }
    // Required amount of gas on the foreign chain has been paid according
    // to on-chain fee quoting. `gasfraction` defaults to "1 / 2".
  & { type: "onChainFeeQuoting", gasfraction?: GasFraction }
) | { // all types have the following fields...
    // If a message matches, this policy will be used.
    // If no matching list is specified, all messages will match.
    matchingList?: MatchingList
};

// A list of matching rules. A message matches if any of the list
// elements matches the message.
type MatchingList = Array<MatchingListElement>;

// Matches a message if any of the provided values matches.
interface MatchingListElement {
    originDomain?: NumericFilter
    senderAddress?: HashFilter
    destinationDomain?: NumericFilter
    recipientAddress?: HashFilter
}

type NumericFilter = Wildcard | U32 | Array<U32>;
type HashFilter = Wildcard | H256 | Array<H256>;

// 32-bit unsigned integer
type U32 = number | string;
// 256-bit unsigned integer; Note: `number` type has limited precision.
type U256 = string | number;
// 256-bit hash (can also be less) encoded as hex
type H256 = string;
// Matches anything
type Wildcard = "*";
// A numeric string in the form `{numerator} / {denominator}`, e.g. "1 / 2"
type GasFraction = string;
--gasPaymentEnforcement '[{"type": "none", "matchingList": [{"senderAddress": "0xa441b15fe9a3cf56661190a0b93b9dec7d041272"}]}, {"type": "minimum", "payment": 100000}]'

whitelist​

Description: A matching list to define what messages should be allowed. Any messages which do not match this list will not be relayed. If no whitelist is supplied all messages will be allowed.

See also message filtering

Optional: Yes

Agents: Relayer

Type: JSON (string)

// A list of matching rules. A message matches if any of the list
// elements matches the message.
type MatchingList = Array&#x3C;MatchingListElement>;

// Matches a message if any of the provided values matches.
interface MatchingListElement {
    originDomain?: NumericFilter
    senderAddress?: HashFilter
    destinationDomain?: NumericFilter
    recipientAddress?: HashFilter
}

type NumericFilter = Wildcard | U32 | Array&#x3C;U32>;
type HashFilter = Wildcard | H256 | Array&#x3C;H256>;

// 32-bit unsigned integer
type U32 = number | string;
// 256-bit hash (can also be less) encoded as hex
type H256 = string;
// Matches anything
type Wildcard = "*";
--whitelist '[{"senderAddress": "0xa441b15fe9a3cf56661190a0b93b9dec7d041272", "originDomain": [1, 42]}, {"destinationDomain": 1}]'

blacklist​

Description: A matching list to define what messages should be ignored. Any messages which match this list will not be relayed. If no blacklist is supplied all messages will be allowed.

See also message filtering

Optional: Yes

Agents: Relayer

Type: JSON (string)

type blacklist = MatchingList | undefined;

// A list of matching rules. A message matches if any of the list
// elements matches the message.
type MatchingList = Array<MatchingListElement>;

// Matches a message if any of the provided values matches.
interface MatchingListElement {
    originDomain?: NumericFilter
    senderAddress?: HashFilter
    destinationDomain?: NumericFilter
    recipientAddress?: HashFilter
}

type NumericFilter = Wildcard | U32 | Array<U32>;
type HashFilter = Wildcard | H256 | Array<H256>;

// 32-bit unsigned integer
type U32 = number | string;
// 256-bit hash (can also be less) encoded as hex
type H256 = string;
// Matches anything
type Wildcard = "*";
--blacklist '[{"senderAddress": "0xa441b15fe9a3cf56661190a0b93b9dec7d041272", "originDomain": [1, 42]}, {"destinationDomain": 1}]'

transactiongaslimit​

Description: The max allowable gas to relay a transaction.

Optional: Defaults to no limit

Agents: Relayer

Type: Numeric (string | number)

--transactionGasLimit 250000000

skiptransactiongaslimitfor​

Description: List of domain ids to skip applying the transactiongaslimit for.

Optional: Defaults to using the transactiongaslimit for all domains

Agents: Relayer

Type: string (comma separated list of domain ids)

--skipTransactionGasLimitFor "43114,10,42220"

allowlocalcheckpointsyncers​

Description: Whether to allow local checkpointsyncer types, if false it will ignore them.

Optional: Defaults to false

Agents: Relayer

Type: boolean

--allowLocalCheckpointSyncers false

AWS_ACCESS_KEY_ID​

Description: (Env only) The access key ID of your validator's AWS IAM user.

Optional: Required if any signer configuration uses aws

Agents: Relayer & Validator

Type: string

Not supported as an argument

AWS_SECRET_ACCESS_KEY​

Description: (Env only) The secret access key of your validator's AWS IAM user.

Optional: Required if any signer configuration uses aws

Agents: Relayer & Validator

Type: string

Not supported as an argument